Carigamers

Tech Talk => Hardware, Tweaking & Networking => Topic started by: Saxito Pau on July 23, 2013, 06:59:17 AM

Title: Anyone can test DDR2 ECC RAM for me?
Post by: Saxito Pau on July 23, 2013, 06:59:17 AM
In a nutshell,

I am troubleshooting a Dell Precision 670 Workstation that not booting up. The motherboard was recently replaced due to blown capacitors (board purchased by owner) but when I try to boot, I get the diagnostic codes indicating RAM issues.

Already tried one stick at a time, different slots (anything other than slot 1 or 2 causing beep code; silent otherwise - stupid board ), even removing one of the two processors with VRM. Nada.

It is 2 x 4GB DDR2 ECC sticks and I want to isolate whether is the RAM or the board that's bad (but I feel is a bad board they get)

This be quite urgent, so you can give me a pull out, it is appreciated. Especially if you have access to a Dell Precision 670
Title: Re: Anyone can test DDR2 ECC RAM for me?
Post by: Netizen1 on July 23, 2013, 08:50:56 AM
I have a Dell Precision 470, would that work Sax?
SimplePortal 2.3.3 © 2008-2010, SimplePortal