Value select memory

[Kraeoss]

ok fellas.... i currently cant afford cruical/corsair memory so i wanna find out how to adjust the timings for markvision memory  if anyone has ever oc'd or tinkered with it...

[W1nTry]

Generally the cheaper the memory the worse it performs. Markvision is one of the worst offenders where in some cases it doesn't even operate stable at it's advertised settings. I wouldn't try to OC that with a 10 foot poll. However if you do chose to risk your mobo fizzling into a smokey pulp there are simple guidelines to OCing the memory.

Basically you relax the timings CAS, RAS, TRAS, etc to higher than normla operation values as the frequency rises. Also you (in most cases) will be required to adjust the RAM voltage. These setting are however a function of the MOTHERBOARD BIOS. If you don't have the needed settings in the BIOS then tough. I am sure Arc, or Capt would be able to give you much more specific information on timings.

[Philosophical45]

umm d most i ever oc da memory to was 900mhz, u can use 5-5-5-15, yet the memory was 5-5-5-18.. anything lower than that, u won't boot... and yea, 1.9 volts was the highest i carried it to. If you wanna go over that, just have some blues ready to buy some new ram..LOL


edit: i was talkin bout the markvision ram btw.. lolz

[Kraeoss]

ok ok i see... arite i'll try doin that. btw i have an asrock board